• 01422 209789 / 01422 209666
    sales@2ktechnologies.com

Humbrol AC5601 Matt Cote Varnish 28ml Glass Bottle Solvent Based

£6.99

Out of stock

Product Description

HUMBROL MATT COTE – 28ml GLASS BOTTLE – GLOSS VARNISH

Modelcote Matt Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth Matt finish.

Usage

A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, low-sheen matt finish.

Substrate

Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Matcote is usually applied as the final coat to a fully painted and decaled model.

Application

Brush or airbrush. Thin suitably when airbrushing using Enamel thinners.

Drying Time

Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.

Coverage

Dependent on application and thickness of coats.

How to Clean

Brushes: Use Enamel thinners. Airbrushes:Flush through using enamel thinners.

Flammable, Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Keep out of reach of children. Avoid contact with skin. Use only in ventilated areas. If swallowed seek medical advice immediately and show container label.

Additional Information

Type

Paints/ Accessories

MPN

AC5601

Subtype

Varnish

Brand

Humbrol

EAN

Does not apply