309 – 15ML ENAMEL PAINT – GLASS JAR
LATER FREIGHT STOCK GREY (UNFITTED WAGONS & VANS)
RailMatch Paint – Enamel
RailMatch paints have been developed with the modeller in mind and are suitable for brushing or spraying. If using our paints through an airbrush the paint will require thinning by approximately 15-20% enamel thinner, or etch primer thinners if you are using the etch primer. If using weathering shades you may want to “thin” the paint further to create a dusting effect. All RailMatch paints are produced with an eggshell (satin) finish, with the exception of the weathering colours which are matt. As from February 2010 all RailMatch enamel paints are now lead free. Please remember that when thinning paints the sheen will be reduced as will colour density. This can normally be corrected by using a suitable varnish to finish your model. Please ensure jar products are well stirred prior to use and aerosols are well shaken; 5 minutes is not excessive! When using aerosols ensure you are in a well ventilated, dust free environment. For best results build up colour by layers, not one heavy coat. Always ensure models are clean of grease, dust etc. Preparation is important. After using aerosols ensure can is inverted and all paint expelled from tube until air blows clear – clean nozzle before replacing.
All RailMatch paint products are manufactured in Manchester by HMG Ltd. to the highest quality and consistency. HMG are one of the largest paint manufacturers in the UK (supplying such companies as Stagecoach) and their extensive knowledge means RailMatch is probably the best model paint you can buy.